How to Upload a Vid to Yt With Obs
I manage a YouTube channel for the FreeDOS Project, where I tape "how-to" videos with FreeDOS running inside the QEMU PC emulator software. When I started the channel in August 2019, I didn't know anything about recording videos. Only with Open Broadcaster Software, as well called OBS Studio, I've plant recording these videos to be pretty straightforward. Here's how you can practice information technology, too.
Install OBS Studio
I run Fedora Linux, which doesn't include the OBS Studio software by default. Fortunately, the OBS Studio website has an installation guide that walks you lot through the steps to install OBS Studio via the RPM Fusion alternative repository.
If you don't already have RPM Fusion set up on your system, you lot tin add the repository on Fedora using this one-line command:
$ sudo dnf install https://download1.rpmfusion.org/free/fedora/rpmfusion-complimentary-release-$(rpm -East %fedora).noarch.rpm https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm Once the RPM Fusion repo is ready, yous tin can install OBS Studio with this command:
$ sudo dnf install obs-studio If you have an NVIDIA graphics card, there's an extra footstep in the installation guide to install hardware-accelerated video support. But my graphics bill of fare is from Intel, so I don't demand to run the extra steps.
Notwithstanding, OBS Studio does not support Wayland, at least not in the Fedora build. That ways when I want to tape videos with OBS Studio, I need to log into my GNOME desktop using an Xorg session. On the login screen, enter your password, click on the gear-shaped icon in the lower-correct corner, and select GNOME on Xorg.
Configure OBS Studio
The first fourth dimension you lot launch OBS Studio, the software runs an auto-configuration wizard to determine the best settings for recording videos. This makes setup a breeze. If you're recording videos on the desktop, like I am, and so click the Optimize just for recording radio push and click Next.
OBS Studio will run through a series of automated tests before it confirms the best video settings for your system. On my arrangement, that'southward 1920x1080 at 30 frames per 2d (fps), which is good enough for recording my videos.
My setup
The default OBS Studio interface shows the video front end and center and positions the controls at the bottom of the screen. While this is not a bad default arrangement, you tin see in my early videos that I occasionally await away from the camera equally I change from a total-screen webcam video to my QEMU screen. That's because the default OBS Studio configuration places the Scene controls in the lower-left corner.
Breaking virtual center contact like this is distracting, and then I wanted some other style to change scenes without looking for the scene controls. I discovered that I could click and elevate the OBS Studio controls to dissimilar areas on the screen. By positioning the scene controls at the elevation of the screen, near my computer's webcam, I don't demand to expect away from the camera to change scenes.
So, my kickoff step whenever I ready OBS Studio is to elevate the controls to the top of the screen. I like to place the Scene selector panel in the center, and then I don't have to look very far abroad from my photographic camera to change scenes. I proceed the recording controls to one side because I'm never on camera when I start or cease the video, so it doesn't matter if I look abroad to outset or stop my video recording.
Setting up scenes
You can set up OBS Studio to back up your preferred video fashion. When I started recording videos, I watched other how-to videos to see how they were organized. Most start with a brief introduction by the host, then switch to a hands-on demonstration, and end with a "thank you" screen to advertise the aqueduct. I wanted to create my videos similarly, and y'all can exercise that with scenes.
Each scene is a different arrangement of sources, or elements in the video. Each source is like a layer, and then if you have multiple paradigm or video sources, they volition appear to stack on pinnacle of one another.
How you define your scenes depends on the kind of video you desire to make. I do a lot of hands-on demonstration videos, so I have one scene with a total-screen webcam video, another scene that'southward but a QEMU window, and yet another scene that's "movie-in-moving picture" with me over my QEMU screen. I can besides set up separate scenes that show a "thank you" image and links to subscribe to my aqueduct or to join the project on social media.
With these scenes, I tin can record my videos as Live—meaning I don't need to edit them after. I can use the Scene controls in OBS Studio to switch from the QEMU scene to the Full-screen webcam screen and back to the QEMU screen before wrapping up with separate scenes that thank my supporters and share data virtually my channel. That may audio like a lot of work, but once you lot have the scenes set, irresolute scenes is but clicking an item in the Scenes menu. That's why I similar to center the Scene selector at the peak of the screen, so I can easily select the scene I demand.
Here'due south what I utilize to record my videos and how I ready the sources in each:
-
Full-screen webcam: I set up a webcam source from my Vitade webcam as a video capture device (V4L) and use the Transform menu (right-click) to fit the webcam to the screen. This also uses my Yeti microphone for sound as an audio input capture (PulseAudio).
-
QEMU: This is where I spend most of my time in my videos. OBS Studio can use whatsoever window as a source, and I ascertain my QEMU window as a window capture (Xcomposite) source. In case I demand to reboot the virtual machine while I'm recording a video, I also fix a Colour Confined image as a background paradigm on a layer that'due south "backside" the window. This also uses my Yeti microphone for sound equally an audio input capture (PulseAudio).
-
QEMU + webcam: My viewers tell me they similar to encounter me on camera while I'yard showing things in my QEMU window, and so I defined another scene that combines the QEMU and Total-screen webcam scenes. My webcam is a small rectangle in one corner of the screen.
-
Patreon card: At the end of my videos, I give thanks the people who support me on Patreon. I created a striped pattern in GIMP and set that every bit my background paradigm. I then divers a text source where I entered a "thank you" message and a list of my patrons. As before, I prepare my Yeti microphone for sound equally an sound input capture (PulseAudio).
-
End card: As I wrap up the video, I want to encourage viewers to visit our website or join us on social media. Similar to the Patreon card scene, I utilise a groundwork pattern that already includes my text and icons. But to add together a little visual flair, I created a blinking cursor after our URL, as though someone had typed information technology in. This cursor is not really an blitheness but an prototype slideshow source that uses 2 images: a blank rectangle and a rectangle with a cursor. The paradigm slideshow flips between these 2 images, creating the appearance of a blinking cursor.
And action!
One time I create my scene collection, I'k ready to record my videos. I usually get-go by talking over my QEMU window, then I click on the QEMU scene and then click the Start Recording button. Afterwards I've said a few words to set the stage for my video, I click on the Full-screen webcam scene to fully introduce the topic.
After sharing some data near any I'm talking about in the video, I click on the QEMU scene or the QEMU + webcam scene. Which scene I choose depends on whether I demand to be seen during the video or if the "motion-picture show-in-picture" video will obscure important text on the screen. I spend most of the how-to video in this scene, usually while playing a game, demonstrating a programme, or writing a sample program.
When I'm gear up to wrap up, I click on the Patreon card scene to give thanks everyone who supports me on Patreon. Some patrons support me at a higher level, and they get a specific mention and their proper name listed on the screen. And so, I click on the Cease carte du jour scene to encourage viewers to visit our website, join united states on Facebook, follow us on Twitter, and consider supporting me on Patreon. Finally, I click the Cease Recording button, and OBS Studio stops the video.
Using OBS Studio is a great way to record videos. I've used this same method to record other videos, including pre-recorded briefing talks, welcome videos for a remote symposium, and virtual lecture videos when I teach an online class.
The side by side fourth dimension you need to record a video, try OBS Studio. I retrieve yous'll notice it piece of cake to learn and use.
This piece of work is licensed under a Artistic Eatables Attribution-Share Alike 4.0 International License.
Source: https://opensource.com/article/21/4/obs-youtube